| Material Grade | UNS S30452 304HN XM-21, 304H 18Cr-8Ni Stainless Steel |
| Standards | ASTM A213, ASTM A249, ASTM A269, ASME SA213, ASME SA249, ASME SA269, EN 10216-5 TC1 / TC2, PED 97/23/EC, AD 2000, NACE MR0175/ISO 15156 |
| Seamless Tube Size | 3.35 mm OD To 101.6 mm OD |
| Welded Tube Size | 6.35 mm OD To 152 mm OD |
| Swg & Bwg | 10 Swg., 12 Swg., 14 Swg., 16 Swg., 18 Swg., 20 Swg. |
| Wall thickness | 0.020" –0.220", (special wall thicknesses available) |
| SS 304H tube Length | Single Random, Double Random, Standard & Cut length |
| Finish | Polished, AP (Annealed & Pickled), BA (Bright & Annealed), MF |
| Form | Straight, Coiled, Seamless, Round Pipes, Square Pipes, “U” Shape, Pan Cake Coils, Hydraulic Tubes, Rectangular Pipe, Coiled Tubes, Straight or ‘U’ bent Tubes, Hollow, LSAW Tubes Etc. |
| Type | Seamless, ERW, EFW, Welded, Fabricated |
| Electropolished | (EP) Electropolished for Ultra High Purity Systems |
| Non-Electropolished | (BA) Bright Annealed or (AP) Annealed & Pickled for High-Purity, (CFOS) Cleaned for Oxygen Grade Service or Corrosive Systems |
| I.D. Surface Finish Options | 5, 7 & 10 µin. Ra |
| JIS | 8A to 250A |
| Tolerances | In accordance with: ASTM: A269 & A632, JIS: G 3459 |
| 304H stainless steel tubing End | Plain End, Beveled End, Treaded, Ends are suitable for orbital welding |
| Marking | All 304H Stainless Steel tubes are marked as follows: Standard, Grade, OD, Thickness, Length, Heat No. (Or according to the customer’s request.) |
| 304H stainless steel tubing Application | Oil Tube, Gas Tube, Fluid Tube, Boiler and Heatexchanger |
| Value Added Service | Draw & Expansion as per required Size & Length, Polish (Electro & Commercial) Annealed & Pickled Bending, Machining Etc. |
| Specialize in | Stainless Steel 304H Capillary Tube & Other Odd Size |
| Stainless Steel 304H Heat Exchanger & Condenser Tubes |
| Stainless Steel 304H Hydraulic tubing with OD up to 50.8 mm (2.0 in.) are delivered in bright annealed condition |
| Stainless Steel 304H hydraulic tube with OD larger than 50.8 mm are supplied in the annealed and pickled condition, Or in polished condition |
| Marking & Traceability | Each Stainless Steel 304H Tubing is traceable to its producing mill and heat by an identification number etched within 24" (610mm) of one end. |
| 304H stainless steel tubing Test Certificate | Manufacturer Test Certificate according to EN 10204 3.1 B |
| Laboratory Test Certificate from Govt. Approved Lab. |
| Under Third Party Inspection |
| We can also cut, thread, and groove Stainless Steel 304H Tubes to meet your specifications |
